Skip to content

ReactDOM

Search
Close this search box.

Learn ETABS 2024 – Best ETABS Courses & Best ETABS Tutorials

Best ETABS Courses 2021

 

Best ETABS Tutorials 2021

The Comprehensive ETABS Professional Course (RCC and Steel)

The design codes covered are American and Indian standards with an introduction to European standards.

Case study 1 – Design of a prefabricated building steel structure according to Indian standards.

Steel structures, especially PEB, are somewhat tricky to model, analyze and design. The majority of people are comfortable with RCC design, but very few are experts in steel design. After covering this section, you will be able to calculate wind and seismic loads according to Indian standards, model steel structures i.e. portal, plan bracing and elevation bracing, analyze , examine modal forms and design the structure. The instructor will also teach you how to do value engineering and optimize steel structures. By the end of this lecture series, you will be comfortable with steel structures.

Case study 2- Linear dynamic analysis and design of the metal structure of display panels according to Indian standards.

Billboards are supported on very large cantilever steel structures. You will learn how to plan the basic structural system, which can withstand high winds and high seismic loads. You will learn how to do the dynamic analysis of the metal structure. Modal analysis is a very important part. You will also learn how to improve the fashion forms, how to check the fundamental time period. At the end, you will be able to figure out how to design the steel structure. Value engineering and optimization are also taught at the end. Instability is also an integral part of ETABS modelers. You will learn how to remove instabilities.

Case study 3- Linear dynamic analysis and design of industrial heavy steel structure according to American standards

Heavy industrial structures seem very difficult and confusing at first. They can be a nightmare at first for novice engineers, but in this lecture series, you will learn how to do basic steel structure planning, how to plan the elevation plan and bracing. You will learn what are the basic fashion shapes for heavy industrial structures. You will also learn how you can do dynamic structural analysis. At the end you will learn how to design the steel structures according to AISC 360. A separate lecture is given at the end for the design of the connection and the base plate.

Case Study 4- Linear Dynamic Analysis and Design of Spatial Steel Truss Structures for American Standards

Spatial lattice structures are very unique in the way that force flows through them. A large space farm learns first to model, then to analyze, and finally to design by American standards. You will learn more about the fashion shapes of the huge structures. Ultimately, you will be comfortable with how space steel truss structures can be designed.

Case study 5- Nonlinear static analysis or pushover analysis of structures

Much has been written about deep analysis over the past decade. How push over analysis is superior to static push over analysis, but very few people actually know how to perform push over analysis. Even experts in the field of structural engineering are afraid of this topic.

In this lecture series, you will learn how to create the push curve and find the performance point. What it really means to push the structure up to a certain displacement. How the response spectrum curve needs to line up with the thrust curve to find the performance point. Ultimately, you will be able to access the performance of the structure. Axial, shear, and moment hinges are explained using guides.

Case study 6- Linear dynamic analysis of a 23-storey high-rise structure according to Indian standards

In this lecture series you will learn how to read architectural drawings, How to do basic planning of structural elements.

Important widely asked questions that will be answered in this lecture series are

1. What is the difference between flexible and rigid membranes and how to assign membranes to RCC slab?

2. How to do a P-Delta analysis

3. How to scale the response spectrum values ​​to static analysis values ​​of earthquakes.

4. How to read the ETABS editor file?

5. How to design the shear wall?

6. How to export the reactions to SAFE and design the raft in SAFE?

These six questions are very important for any structural engineer to understand when designing any structure in ETABS.

2. For intermediate / novice users the basic ETABS section is provided

This section presents the very basic steps in learning ETABS software. Moderate or expert users can skip this part or can refer to this part as a reminder introduction. You can also refer to this part, in case you encounter a problem while carrying out the case studies.

You will start with the

Absolute Base Section – Instructor takes step by step through the process of drawing grids, defining floors, defining materials, defining cut properties, drawing objects in structural engineering models , definition of loads, selection of load combinations with theoretical explanations

You will learn the basics of interacting with the soil structure and basic raft design. Completing this part will clearly explain the difference between a thin shell, a thick shell and a membrane.

You will also learn the basics of structural dynamics. You will be familiar with forms of fashion, mass participation, earthquake analysis, time periods, etc. You might understand that this is a section to go to in case you get stuck with a case study.

You have to understand that this is not an easy course to take. You may need to repeat the course content of more than 20 hours over and over again to understand the course content. This course is only intended for serious students. Much effort has been made to provide a working understanding of the Software, which is not available anywhere on the Internet and therefore more expensive than other courses on this platform.

Healthy discussions and requests are always welcome indoors.

Learn ETABS & SAFE in the Structural Design of 15 Stories RC

This course is not only a tutorial on ETABS and SAFE software but it is a complete understanding of structural design analysis, how the civil engineer should start with the project, how he / she should think, how we can determine the dimension of the element before modeling it check it in the software. In this course we will design 15 floors of residential buildings, as part of the work we will define and design all types of slabs such as (embossed slab, one way ribbed slab, two way ribbed slab, flat slab and solid slab ), all types of foundations such as (isolated, combined, strips and mats), earthquakes with static and dynamic cases, wind loads, columns and beams and bracing walls + Advanced courses in ETABS + Advanced course in SAFE and AllPile (design of deep foundation piles for a 25-storey tower) + design an ETABS pool

Example 2 Design a mosque with the Dome and the minaret + pile foundation of the minaret to withstand the tensile stresses in the foundation that we will use in the design of the software ETABS, SAFE, SAP2000 + learn to design beams using SAP2000 + how to model the dome in ETABS or SAP2000

How to model the dampers in ETABS (FVD fluid viscous damper) and show the effect f using this type of damper on the displacement of the building floor

How to create report and detailed drawings in ETABS

© 2023 ReactDOM

As an Amazon Associate I earn from qualifying purchases.